MOL Farm Grease 2MG

Lithium-base lubricating grease

A high-performance lubricating grease containing molibden-disulphide and graphite specially developed for agricultural equipment subjected to high risks of seizure. Recommended for lubricating bearings, joints and bolts, primarily in separate lubricating systems.


Applications

  • Equipment subject to high risk of seizure
  • Low speed bearings exposed to dynamic loads
  • Sliding parts of chassis, bogies
  • Screw threads, small gear wheels, springs
  • Individual lubrication systems
Product featuresBenefits
High performance solid additive content
  • Solid additives increase the load-carrying properties at lubrication points, so the risk of seizure is reduced
  • Reduces heat of friction, even in mixed lubrication conditions, so increases the service life of lubricating grease
  • Effective wear protection even under shock loads and low speeds
Excellent wear protection
  • Reduced wear of contacting surfaces, even under varying operating conditions
  • Contributes to increasing equipment lifetime
Excellent load-carrying properties
  • Forms a continuous lubricating film that does not break even under heavy load and low speed conditions
  • Contributes to increasing equipment lifetime
Good mechanical and storage stability
  • Retains stable structure under load, so no softening of lubricating grease and no running off the lubrication point
  • Long-term storage is possible without oil separation or lubricating grease hardening
Excellent static water resistance
  • No softening or runing off the lubrication point in wet, humid environments
  • Provides reliable lubrication for equipment operating outdoors
Excellent corrosion protection
  • Long-term protection against surface damage, even in the presence of moisture
  • Effectively contributes to potential reduction of maintenance costs
Excellent yellow metal compatibility
  • Prevents premature deterioration of non-ferrous metal parts
Are you using the right lubricant?

Data sheets

Performance levels, approvals

DIN 51502: KPF2N-25
ISO 6743-9: L-XBDEB 2

Typical properties

Appearanceblack, homogenous
Base oil viscosity at 40 °C [mm2/s]200
Dropping point [°C]200
Penetration after 60 strokes at 25 °C [0,1 mm]280
Four ball test, weld load [N]3000
Four ball test 60 min/400 N wear diameter [mm]0,5
Timken OK load [kg]20
Oxidation stability at 100 h / 100 °C pressure drop [kPa]25
Corrosion at 100 °C/ 24 h (steel)pass
Copper corrosion (100 °C, 24 h) [grade]1
EMCOR test, distilled water [grade]0
Dynamic water - resistance at 79 °C [mass %]3
Static water resistance at 90 °C [grade]1-90
Oil separation [mass %]3
Graphite content [mass %]1
Molybdenum disulphide content [mass %]1

Packaging

Downloadable publications

Last thing you view

×
Your browser is out of date!

Update your browser to view this website correctly. Update my browser now

×